External link to A 1300-kg car is to accelerate from rest to a speed of 30.0 m/s in a time of 12.0s as it climbs a 15.0 hill Assuming uniform acceleration, what minimum horsepower is needed to accelerate the car in this way?

# A 1300-kg car is to accelerate from rest to a speed of 30.0 m/s in a time of 12.0s as it climbs a 15.0 hill Assuming uniform acceleration, what minimum horsepower is needed to accelerate the car in this way?

| No Comments The power required to accelerate a car up a 15.0-m hill can be determined by calculating the force of its weight, the acceleration needed, and the time given. To calculate this, we must first determine the acceleration of the car by using kinematics equations:Get the Complete Custom Written Paper Written by Real Humans Who have exceptionally Excelled in their Studies and understand […]

External link to Using an average value of 2.4 for relative volatility of benzene relative to toluene, calculate the number of theoretical plates required at total reflux.

# Using an average value of 2.4 for relative volatility of benzene relative to toluene, calculate the number of theoretical plates required at total reflux.

| No Comments The number of theoretical plates required at total reflux can be determined using an average relative volatility value for benzene relative to toluene. Relative volatility is the ratio between the vapor pressures of two components present in a mixture and it is used to calculate how efficiently a distillation column separates these components from each other. The average relative volatility of benzene […]

External link to In steady state ideal PFR, the concentration of reactant_____decreases/increases/stays constant) from entrance to exit of the reacto reactor?

# In steady state ideal PFR, the concentration of reactant_____decreases/increases/stays constant) from entrance to exit of the reacto reactor?

| No Comments The concentration of reactant decreases from the entrance to the exit of a steady-state ideal PFR reactor due to the reaction taking place within the reactor. In an ideal, steady-state PFR (Plug Flow Reactor) reactor, reactants flow in at one end, undergo chemical reactions and flow out at the other end without any mixing or diffusion of material along its length. As […]

External link to Demonstrate how logic function MOV and ADD are represented in. PLC ladder logic context

# Demonstrate how logic function MOV and ADD are represented in. PLC ladder logic context

| No Comments MOV and ADD are two basic logic functions used in Programmable Logic Controllers (PLCs) to perform a variety of tasks, from controlling motors to monitoring safety systems. In ladder logic context, the MOV and ADD instructions can be represented in several ways: by a series of rungs connected with contact elements; by function blocks; or as simplified symbolic representations.Get the Complete Custom […]

External link to Calculate the heat loss in W/m 0 C.

# Calculate the heat loss in W/m 0 C.

| No Comments The heat loss from the pipe can be calculated using the equation: Heat Loss = k * A * (T1-T2)/L Where k is thermal conductivity, A is surface area, T1 is the temperature of outer surface and T2 is temperature of inner surface and L is thickness.Get the Complete Custom Written Paper Written by Real Humans Who have exceptionally Excelled in their […]

External link to Demonstrate( diagram and brief explanation ) Boolean algebra in a PLC context: use 2X1C’s and label them A,B. Show how you would achieve both or and in ladder logic

# Demonstrate( diagram and brief explanation ) Boolean algebra in a PLC context: use 2X1C’s and label them A,B. Show how you would achieve both or and in ladder logic

| No Comments Boolean algebra is a system of logical calculus used to describe relationships between variables in an automated control system. In the context of programmable logic controllers (PLCs), Boolean algebra can be used to create and analyze ladder logic diagrams, which are visual representations of the programs that PLCs execute.Get the Complete Custom Written Paper Written by Real Humans Who have exceptionally Excelled […]

External link to How much would the heat loss be reduced by doubling the thickness of the insulation?

# How much would the heat loss be reduced by doubling the thickness of the insulation?

| No Comments The amount of heat loss that is reduced by doubling the thickness of insulation depends on a few factors, such as the type and quality of insulation being used, as well as the size of the area in question. Generally speaking, increasing the thickness of insulation can reduce heat loss significantly due to its ability to slow down convection and radiation from […]

External link to Try to explain what the advantage and disadvantage of the support would mean to you as an end consumer

# Try to explain what the advantage and disadvantage of the support would mean to you as an end consumer

| No Comments The advantage of support would be that as an end consumer, I would have access to resources and assistance should I encounter any issues with a product or service. This could come in the form of customer service contacts, online tutorials or helpful advice from experienced professionals. Having this additional layer of protection gives me peace of mind knowing that if something […]

External link to In 1906, Michael Tswett, a Russian botanist, described a method to separate chloroplast from plant tissue into its components. Many of the components were highly colored, and he called the s

# In 1906, Michael Tswett, a Russian botanist, described a method to separate chloroplast from plant tissue into its components. Many of the components were highly colored, and he called the s

chemical engineering question I already answers some questions in blank. I need someone help me to continue to answer the paper Report Sheet as I attached belowRequirements: Answer the questionCHM 101 ? Separation Using Paper ChromatographyPurpose:In this experiment you will become familiar with chromatography, a technique used to separate small quantities of mixtures into their component parts. Paper chromatography is used to analyze mixtures of […]

External link to Open circulation cooling water systems are commonly used in the manufacturing industry to cool equipment and goods and release waste heat into the environment. Waste water from the system, a

# Open circulation cooling water systems are commonly used in the manufacturing industry to cool equipment and goods and release waste heat into the environment. Waste water from the system, a

chemical engineering report Requirements: fix my reportDate: 27th February 2023.To: TA NameFrom: Your name, team #, lab sectionSubject: Investigating the effects of air flow rate and water flow rate on the performance of Open Circuit Cooling Tower System.Summary.The purpose of cooling towers is to remove excess heat from the water source. In many cases, this water is heated as a result of some industrial process […]

## Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
\$26
The price is based on these factors:
Number of pages
Urgency
Basic features
• Free title page and bibliography
• Unlimited revisions
• Plagiarism-free guarantee
• Money-back guarantee
On-demand options
• Writer’s samples
• Part-by-part delivery
• Overnight delivery
• Copies of used sources
Paper format
• 275 words per page
• 12 pt Arial/Times New Roman
• Double line spacing
• Any citation style (APA, MLA, Chicago/Turabian, Harvard)

# Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

### Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

### Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

### Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.